Faculty of Engineering
and Information Technology
|
Faculty of Engineering
and Information Technology
|
| |
Journal and Conference Publications by year (since 2000)
2009 2008 2007 2006 2005 2004 2003 2002 2001 2000
Publications in 2004:
Journal papers Burns M and Compston P. Interfacial fracture toughness of polyester-based fiber-metal laminates with primary contact and secondary adhesive bonding. Journal of Materials Science 39 (2004) 2855-2859. Compston P, Cantwell WJ, Cardew-Hall MJ, Kalyanasundaram S and Mosse L. A comparison of surface strain for stamp formed aluminium and an aluminium-polypropylene laminate. Journal of Materials Science 39 (2004) 6087-6088. Cvetanovska A and Compston P. Degree of cure and tensile properties of vinylester resin cured with ultraviolet light. Journal of Materials Science 39 (2004) 1791-1793. Feng XQ, Qin QH and Yu SW, Quasi-micromechanical damage model for quasi-brittle solids with interacting microcracks, Mechanics of Materials, 36(3), 261-273, 2004 Kang YL, Lin XH and Qin QH, Inverse/Generic Method and its Application in Identification of Mechanical Parameters of Interfacial Composites, Composite Structures, 66(1-4), 449-458, 2004Qin QH, Dual variational formulation for Trefftz finite element method of Elastic materials, Mech. Res. Commun., 31(3), 321-330, 2004 Qin QH, Green’s functions of magnetoelectroelastic solids with a half-plane boundary or bimaterial interface, Philosophical Magazine Letters, 84(12), 771-779, 2004 Qin QH, Material Properties of Piezoelectric Composites by BEM and Homogenization Method, Composite Structures, 66(1-4), 295-299, 2004 Qin QH, Micromechanics-BE solution for properties of piezoelectric materials with defects, Engineering Analysis with Boundary Elements, 28(7), 809-814, 2004 Qin QH and Swain MV, A Micro-mechanics Model of Dentin Mechanical Properties, Biomaterials, 25(20), 5081-5090, 2004 Qin QH and Ye JQ, Thermolectroelastic solutions for internal bone remodeling under axial and transverse loads, Int. J. Solids & Structures, 41(9-10), 2447-2460, 2004 Qiu W, Kang YL, Sun QC, Qin QH and Lin Y, Stress Analysis and Optimized Design for Multilayer Piezoelectric Displacement Actuator, Acta Mechanica Solida Sinica, 17(4), 323-329, 2004 Scott-Murphy A., Cardew-Hall, M.J., Hodgson P.D., Kalyanasundaram S., “A Hybrid Draw Die Optimisation Technique for Sheet Metal Forming”, Jnl. Manufacturing Sciences and Engineering, Transactions of ASME, Vol 126, Aug 2004, p582-590 To L-Th. and Z.H. Stachurski, “Random packing of spheres in a round cell”, J. Non-Cryst. Solids, Vol.333/2 (2004) 161-171. Wang KY, Qin QH, Kang YL, A modified isoparametric mapping fill method to display colour mapping of data, Advances in Engineering Software, 35(8-9), 587-593, 2004Yang QS and Qin QH, Micro-mechanical analysis of composite materials by BEM, Engineering Analysis with Boundary Elements, 28(8), 919-926,2004 Ye JQ, Sheng HY and Qin QH, A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads, Computers & Structures, 82(15-16), 1131-1141, 2004Zheng GF, Kang YL, Sheng J, Qin QH, Wang HW, Fu DH, Inference of moisture content and time on the mechanical behaviour of polymer material, Science in China, Series E: Engineering & Materials Science, 47(5), 595-607, 2004
Conferences Abdullah R, G. Reyes, Cantwell WJ, L. Mosse, Compston P and S. Kalyanasundaram. The High Velocity Impact Response of Fibre-metal Laminates. The 5th International Symposium on Impact Engineering, Cambridge, UK, 11th – 15th July (2004). Campbell J, Compston P, Z.H. Stachurski. Improved manufacture and productivity of a high performance composite oar blade. 11th European Conference on Composite Materials, Rhodes, Greece, 31st May – 3rd June (2004). Cui Y and Qin QH, Fracture analysis of Mode III problems by Trefftz finite element approach, Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, Sept. 5-10, 2004, Beijing, China, Vol. II, pp380, Tsinghua University press, (abstract in hard copy and whole paper on conference CD-ROM) Doolan MC, M.A. Dopita, L.E. Waldron, J. Hart, R. Zhelem, G. Bloxkam, P. Conroy, P. McGregor, L Pfitzner, “Optical wavelength image slicer”; Proceedings of SPIE - The International Society for Optical Engineering, v 5492, n PART 1, Ground-based Instrumentation for Astronomy, 2004, p 421-428. Dopita, M.A.; Waldron, L.E.; McGregor, P.; Conroy, P.; Doolan M; Zhelem, R.; Bloxham, G.; Saunders, W.; Jones, D.; Pfitzner, L.; “WiFeS: The wide field spectrograph”; Proceedings of SPIE - The International Society for Optical Engineering, v 5492, n PART 1, Ground-based Instrumentation for Astronomy, 2004, p 262-270. Kang YL, Zhang ZF, Wang HW, and Qin QH, Experimental investigations of size effect on fracture toughness of metallic foils, The 15th European Conference of Fracture: Advanced Fracture Mechanics for Life and Safety Assessments, Stockholm, Sweden, August 11-13, 2004 Mosse L, Cantwell WJ, M.J. Cardew-Hall, Compston P, S. Kalyanasundaram. Effect of process temperature and blank-holder force on the forming of fibre metal laminate systems. The 11th European Conference on Composite Materials, Rhodes, Greece, 31st May – 3rd June (2004). Mosse L, Cantwell WJ, M.J. Cardew-Hall, Compston P, S. Kalyanasundaram. Formability characteristics of a self-reinforced polymer-metal laminate in channel forming. The 11th European Conference on Composite Materials, Rhodes, Greece, 31st May – 3rd June (2004). Mosse L, Cantwell WJ, M.J. Cardew-Hall, Compston P, S. Kalyanasundaram. Forming characteristics of aluminium and glass-reinforced thermoplastic fibre-metal laminates. The 4th Asian-Australasian Conference on Composite Materials, Sydney, Australia, 6th – 9th July (2004). Qin QH, Fracture analysis of piezoelectric materials by boundary and Trefftz finite element methods, Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, Sept. 5-10, 2004, Beijing, China, pp558-563, Tsinghua University press, (whole paper in hard copy and on conference CD-ROM, keynote lecture) Rolfe, B, West, G., Abdallah, S., Cardew-Hall, M.J., “FE Robustness: comparing sheet metal forming variation and finite element models” NUMIFORM 2004, Columbus, Ohio, USA, June 2004 Rossiter, C., Cardew-Hall, M.J., “Optimised scheduling model for complex systems characterised by limited and competing resources”, APIEMS2004, The 5th Asia-Pacific Industrial Engineering and Management Systems Conference, Gold Coast, Australia, December 12-15, 2004 Smith, J., Cardew-Hall, M.J., Pantano, V., Hodgson, P., “Design, implementation and use of a knowledge acquisition tool for sheet metal forming”, 24th ASME Computers In Engineering Conf., Salt Lake City, USA, Sept 2004 | ||
|
|
|
| Page last updated:
20 April, 2009 Please direct all enquiries to: Qinghua.Qin@anu.edu.au |
| The Australian National University — CRICOS Provider Number 00120C |
