CECS home | ANU Home | Search ANU

Publications by Materials and Manufacturing Group

 

Journal and Conference Publications by year (since 2000)

 

2009  2008   2007   2006   2005   2004  2003   2002   2001  2000

 

Publications in 2006:

 

Journal papers

Cao, Z. and Cardew-Hall, M.J., “Interference-fit riveting technique in fiber composite laminates”  Aerospace Science and Technology, Volume 10, Issue 4, May 2006, Pages 327-330

Cao Z and Qin QH, A Study on Driving Interference-fit Fastener Using Stress Wave, Materials Science Forum, 532-533, 1-4, 2006

Cen H, Kang YL, Lei Z, Qin QH and Qiu W, Micromechanics analysis of Kevlar-29 aramid fiber and epoxy resin microdroplet composite by Micro-Raman spectroscopy, Composites Structures, 75 (1-4), 532-538, 2006

Compston P, Styles M and Kalyanasundaram S. Low energy impact failure modes in aluminum foam and polymer foam sandwich structures. Journal of Sandwich Structures and Materials 8 (2006) 365-379.

Cui Y and  Qin QH, Disscussion on anti-plane crack problems by hybrid Trefftz finite element approach, Acta Mechanica Solida Sinica, 27(2), 167-174, 2006 (in Chinese)

Cui Y,  Qin QH and Wang JS, Application of HT finite element method to multiple crack problems of Mode I, II and III,  Chinese J. of Eng. Mech., 23(3), 104-110, 2006 (in Chinese)

Dhanasekar M, Han JJ and Qin QH, Hybrid Trefftz element Containing elliptic hole, Finite Elements in Analysis and Design, 42(14-15), 1314-1323, 2006

Flynn AJ, Z.H. Stachurski, “Microstructure and Physical Properties of Stoneware Clay Bodies”, J. Clay and Clay Minerals, Vol.41 (2006) 771-785.

Fu DH, Hou ZD, Qin QH and Jiang XG, Analysis of the waveforms of piezoelectric voltage of bone, Journal of Tianjin University, Science and Technology, v 39, n SUPPL., 349-353, 2006 (in Chinese)

Gresham J, Cantwell WJ, Cardew-Hall MJ, Compston P and Kalyanasundaram S. Drawing Behaviour of Metal-Composite Sandwich Structures. Composite Structures 75 (2006) 305-312.

Hong XC and Qin QH, Limit cycle analysis on a cubic Hamiltonian system with quintic perturbed terms, International Mathematical Forum, 1 (37), 1805-1818, 2006

Kalyanasundaram S, A. Lowe, A.J., Watters, “Finite Element Analysis and Optimization of composite Wheel Chairs”, Composite Structures ,Vol. 75 (2006) pp. 393-399

Mosse L, Cantwell WJ, Cardew-Hall MJ, Compston P and Kalyanasundaram S. The development of a finite element model for the stamp forming of fibre metal laminates. Composite Structures 75 (2006) 298-304.

Mosse L, Compston P, Cantwell WJ, Cardew-Hall MJ and Kalyanasundaram S. The influence of process variables on the formability of fibre-metal laminates. Journal of Materials Processing Technology 172 (2006) 163-168.

Qin QH, Wang JS and Kang YL, A theoretical model for electroelastic analysis in piezoelectric fibre push-out test, Archive of Applied Mechanics, 75(8-9), 527-540, 2006

Qin QH, Wang JS and Li XL, Effect of elastic coating on fracture behaviour of piezoelectric fibre with a penny-shaped crack, Composites Structures, 75 (1-4), 465-471, 2006

Qiu W, Kang YL, Qin QH, and Li WT, Regional Identification, Partition and Integral Phase Unwrapping Method for Moire Interferometry Images, Applied Optics, 45 (25), 6551-6559, 2006

Qu CY and Qin QH, Evolution of bone structure under axial and transverse loads, Structural Engineering and Mechanics, 24(1), 19-29, 2006

Qu CY, Qin QH and Kang YL, A hypothetical mechanism of bone remodeling and modeling under electromagnetic loads, Biomaterials,  27(21), 4050-4057, 2006

Stachurski ZH, “Testing materials’ hardness: science, technology and application”, Materials Forum, Vol.30, (2006) 118-125.

To L-Th, D.J. Daley and Z.H. Stachurski, “On the definition of an ideal amorphous solid based on hard spheres”, Solid State Sciences, Vol.8/8, (2006) 868-879.

Wang G, Chen GM, Shen J, Stachurski ZH, Qin QH, Sun JF and Zhou BD, Deformation behaviours of a tungsten-wire/bulk metallic glass matrix composite in a wide strain rate range, Journal of Non-Crystalline Solids, 352(36-37), 3872-3878, 2006

Wang H and Qin QH, A meshless method for generalized linear or nonlinear Poisson-type problems, Engineering Analysis with Boundary Elements, 30(6), 515-521, 2006

Wang H, Qin QH and Kang YL, A meshless model for transient heat conduction in functionally graded materials, Computational Mechanics, 38(1), 51-60, 2006

Wang H, Qin QH and Kang YL. The method of fundamental solutions with radial basis functions approximation for thermoelastic analysis . Journal of Dalian University of Technology, 2006, 46(Suppl): 46-51 (in Chinese)

Wang JS, Cui Y, Qin QH and Jia J, Application of Trefftz BEM to anti-plane piezoelectric problem, Acta Mechanica Solida Sinica 19(4), 352-364, 2006

Wang JS and Qin QH, Debonding criterion for the piezoelectric fibre push-out test, Philosophical Magazine Letters,  86(2), 123-136, 2006

Wang JS and Qin QH, Penny-shaped crack in a solid piezoelectric cylinder with two typical boundary conditions, Journal of Beijing University of Technology, v 32, n SUPPL., June, 2006, p 29-34

Wang KY, Dhanasekar M, Qin QH and Kang YL, Contact analysis using Trefftz and interface finite elements, Computer Assisted Mechanics and Engineering Sciences 13(3): 457-471, 2006

Yang QS and Qin QH, On the homogenization concepts and macroscopic properties of orthotropic composites with non-symmetrically shaped inclusions, Key Engineering Materials, 312, 117-122, 2006

Yang QS, Qin QH  and Liu T, Interlayer stress in laminate beam of piezoelectric and elastic materials, Composites Structures, 75 (1-4), 587-592, 2006

Zhang ZF, Kang YL, Wang HW, Qin QH, Qiu Y, Li XQ, A novel coarse-fine search scheme for digital image correlation method, Measurement, 39 (8), 710-718, 200

 

Conferences

Cao Z and Qin QH and Cardew-Hall MJ, A study on replacing bolted joining with riveted joining in composite load-carrying pail of satellite, Proceedings of The 12th International Manufacturing Conference, September 21-23 2006, Xi′an, China, in”Advances in Manufacturing Engineering, Jiang Chengyu (ed.), pp. 6-9, Northwestern Polytechnical University Press, 2006

Ferrari, D., West, G., Rolfe, B., Cardew-Hall, M., “Freeform feature representation and comparison” 26th ASME Computers in Engineering Conf. Pennsylvania, Sept 2006

Gresham J, Compston P, S. Kalyanasundaram, W.J. Cantwell, M.J. Cardew-Hall. Out-of-Plane Biaxial Forming of Thermoplastic-based Fibre-Metal Laminates. ECCM-12, Biarittz, France August 2006.

Hong XC and Qin QH, Bifurcation of Limit Cycles in a Cubic Hamiltonian System with Perturbed Terms, Dynamics of Continuous, Discrete and Impulsive Systems-B 14, No. S5, 12-16, 2007 (Proceedings of the 2nd International Conference on Dynamics, Vibration and Control Beijing, China, August 23-26, 2006)

MacLennan A, West G, Cardew-Hall, MJ “Investigating the segmentation of freeform triangulated surfaces using self organising maps”, 26th ASME Computers in Engineering Conf. Pennsylvania, Sept 2006

Matuzuyk, T., Rolfe, B., Cardew-Hall, M.J., “Observing dimensional variation in an automotive sheet metal sub-assembly “ SAE Congress, Detroit, USA, 4-6 April 2006.

Qin QH, Trefftz plane element of piezoelectric plate with p-extension capabilities. Proceedings of IUTAM Symposium “Mechanics and Reliability of Actuating Materials” held in Beijing, China, 1-3 September, 2004, Series: Solid Mechanics and Its Applications, Vol. 127, pp. 144-153, Yang, W. (Ed.), Dordrecht, Springer, 2006

Doolan, M; Bloxham, G.; Conroy, P.; Jones, D.; McGregor, P.; Stevanovic, D.; Van Harmelen, J.; Waldron, L.E.; Waterson, M.; Zhelem, R.; “Focusing a NIR adaptive optics imager, experience with GSAOI”; Proceedings of SPIE - The International Society for Optical Engineering, v 6273 II, Optomechanical Technologies for Astronomy, 2006, p 62732D.

Waterson, M.; McGregor, P.; Van Harmelen, J.; Dawson, M; Doolan, M.; Young, P.; “Characterization and performance of HAWAII-2RG focal plane arrays for NIFS and GSAOI” ; Proceedings of SPIE - The International Society for Optical Engineering, v 6276, High Energy, Optical, and Infrared Detectors for Astronomy II, 2006, p 62760N.